Trouble Shooting; Led Lights; Malfunction Table - CONSTRUCTA CD75132 Notice D'utilisation Et De Montage

Insert the activated charcoal filter at the rear, fold it up and
5.
lock it in the centre using the wing nut. If the appliance has a
spacer rail, reinsert this.
Reinsert the metal grease filter.
6.

Trouble shooting

Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.

Malfunction table

Problem Possible cause Solution
The appliance The plug is not
does not work plugged in.
Power cut
Faulty fuse
The lighting The LED lights
does not work. are defective.
--------
22
T r o u b l e s h o o t i n g
Connect the appliance to
the electricity supply
Check whether other
kitchen appliances are
working
Check in the fuse box to
make sure that the fuse for
the appliance is OK
Call the after-sales service.
Removing the activated charcoal filter
Remove the metal grease filter.
1.
If the appliance has a spacer rail, remove this. Unlock the
2.
activated charcoal filter with the wing nut in the centre and
remove it.
Replace the activated carbon filter and lock it in place using
3.
the wing nut.
If the appliance has a spacer rail, reinsert this. Reinsert the
4.
metal grease filter.

LED lights

Defective LED lights may be replaced by the manufacturer, their
customer service or a qualified technician (electrician) only.
:
Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly into the
switched on LED lights for longer than 100 seconds.