Table des Matières
Publicité
10
12
15
-step zig-zag
EN
Sewing on lace and elastic, darning,
mending, reinforcing edges.
Set the machine as illustrated.
Pattern selector on "
".
Set stitch length control between "1" - "2".
Set stitch width control between "3" - "5".
(model 15)
Place patch in position. The stitch length can
be shortened to produce very close stitches.
(1)
When mending tears, it is advisable to use
a piece of backing fabric to reinforce. The
stitch density can be varied by adjusting the
stitch length. First sew over the center and
then overlap on both sides. Depending on
the type of fabric and damage, sew between
3 and 5 rows. (2)
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
502020.75.25_021V4D0102_1012_IM_bernette 10 12 15_EN_ES_FR_PT
Publicité
Table des Matières
