Table des Matières
Publicité
10
12
15
502020.75.25_021V4D0102_1012_IM_bernette 10 12 15_EN_ES_FR_PT
Darning
EN
- Turn stitch length dial to the desired length.
- Pattern selector on "
" or "
- Center needle position.
- Position the fabric to be darned under the
presser foot together with the under laying
fabric to be used.
- Lower the presser foot and alternately
sew forward or reverse using the reverse
sewing lever.
- Repeat this motion until the area to be
darned is filled with rows of stitching.
For reverse sewing instructions, see figure A,
page 42.
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
".
Publicité
Table des Matières
