26-Inch Width - Invacare Personal Back 10 Manuel De L'utilisateur Et D'entretien

SECTION 1—ENGLISH INSTRUCTIONS
12° BACK ANGLE
Front Mounting Slot
Front of
Wheelchair
Front Mounting
Pin Position
18° BACK ANGLE
Middle Mounting Slot
Front of
Wheelchair
Front Mounting
Pin Position
24° BACK ANGLE
Rear Mounting Slot
Front of
Wheelchair
Front Mounting
Pin Position
FIGURE 1.7 - ADJUSTING THE PERSONAL BACK10 ANGLE -

22 - 26-INCH WIDTH

NOTE: For this procedure refer to FIGURE 1.8.
NOTE: If necessary, remove the Personal Back10 from the wheelchair before performing this
procedure. Refer to Installing/Removing The Personal Back10 on page 13.
NOTE: Changes to the mounting pin position and side plate mounting slot will achieve the
following back angles:
Personal Back™10 Personal Back™10 Plus
6° BACK ANGLE
Front Mounting Slot
Front of
Wheelchair
Middle Mounting
Pin Position
12° BACK ANGLE
Middle Mounting Slot
Front of
Wheelchair
Middle Mounting
Pin Position
18° BACK ANGLE
Rear Mounting Slot
Front of
Wheelchair
Middle Mounting
Pin Position
13 - 20-INCH WIDTH
16
0° BACK ANGLE
Front Mounting Slot
Front of
Wheelchair
Rear Mounting
Pin Position
6° BACK ANGLE
Middle Mounting Slot
Front of
Wheelchair
Rear Mounting
Pin Position
12° BACK ANGLE
Rear Mounting Slot
Front of
Wheelchair
Rear Mounting
Pin Position
Part No 1114817