ACteon SOPROCARE Manuel D'utilisation page 17

E N G L I S H
you have chosen to use a footswitch, press it for more than three seconds).
• Perform the same procedure to switch back to one-image mode.
• In one-image mode, you just have to slightly touch SoproTouch (or briefl y press the footswitch once) as soon as the desired
image appears on the monitor. The image is automatically stored in the camera and displayed on the screen. If you want to return
to direct mode, you just have to slightly touch SoproTouch once more (or press the footswitch).
• Another little gentle touch on SoproTouch (or press on the footswitch) will freeze another image by deleting the previous
one.
• In four-image mode, the image is stored in one of the quarters of the screen when you slightly touch SoproTouch (or press
the footswitch) and remains displayed on the screen. Another little slight touch on SoproTouch (or press of the footswitch)
will return the image to direct mode. A third little slight touch (or press) will store a second image in another quarter of the screen
and so on until obtaining the four images.
NOTE :
The footswitch must be conformed IPX1 according to IEC 60529 standard (Article 15.4.7.3 of IEC 60601-1 ed3 standard).
16
SOPROCARE • User's manual