Safety Instructions - ACteon SOPROCARE Manuel D'utilisation

• DO NOT expose the SOPRO camera to water spray and do not store it in a humid environment (to prevent risk of electrocution).
• When handling camera and dental barriers, always take the appropriate hygiene measures and precautions in order to prevent
cross contamination risks.
• Infection control procedures must be observed when using accessories such as SOPROTIPS and dental barriers. When using
accessories always follow the manufacturer's instructions on how to use said accessory and prevent cross contamination risk from
one patient to another.
• Install the camera in a clean, dry, and well-ventilated place.
• Disconnect the connection box from the power supply if you are not going to use it for several days. Do not pull on the cable.
• DO NOT compress or nip the handpiece cable.
• DO NOT expose the product to high vibrations.
• DO NOT drop the handpiece.
• Handpiece should NEVER be immersed in any liquid, NOR should it be autoclaved.
• For each new patient, it is essential to use the dental barriers provided with the handpiece. Before using the camera, make sure
it does not have any sharp edges.
• The surface temperature in the light emission area can reach above 41°C (after several minutes of use). Therefore avoid maintaining
this emission area in contact with the patient's mouth.
• The camera is a product using group 1 LEDs according to IEC 62471. To avoid any ocular risk do not look directly at the light.
NOTE :
If the hygienic protection is torn while examining a patient or if the handpiece was "infected" while withdrawing the hygienic
protector, it is essential to totally disinfect the handpiece. In order to do this: please refer to the maintenance chapter.
CAUTION:
Modifi cation of the product, without the permission of the manufacturer, is prohibited.
CAUTION:
If the medical equipment is changed, an appropriate control and test should be performed to ensure that the medical equipment
still can be used safety.
6
SOPROCARE • User's manual
E N G L I S H

SAFETY INSTRUCTIONS

NSTR