Deactivating The Slave Mode; Optional Extras - Metz MECABLITZ 44 MZ-2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
slave mode, the mecablitz LC display will neither indicate the aperture nor
the distance.
Please note that the mecablitz 44 MZ-2 as SLAVE will only support the
remote channel "Ad1" in the cordless Metz-Remote-System. For more
details about the slave mode please refer to the operating instructions
for the slave adapter.

14.2 Deactivating the slave mode

• Switch off the mecablitz by its main switch and remove the slave adapter.
• Equip the mecablitz with the SCA adapter or the standard foot 301.
• The slave mode is automatically cancelled when the mecablitz is switched
on again.

15. Optional extras

No guarantee is given for malfunction and damage to the mecablitz
caused by the use of accessories from other manufacturers.
• SCA adapters of the SCA 300 system
for flash operation with system cameras. See separate operating instruc-
tions.
• SCA adapters of the SCA 3002 system
for flash operation with system cameras providing digital data transmission
of SCA functions. Extends the number of functions compared with the SCA
300 system. See separate operating instructions.
• Slave-Adapter SCA 3083 digital
(Item No. 000330838)
for cordless slave flash operation in three modes:
mecalux slave mode, mecalux slave mode with preflash suppression (for
digital cameras with monitoring preflash technology) and slave mode in
the cordless Metz TTL Remote System or Metz Automatic Remote System.
• Slave-Adapter SCA 3082
(Item No. 00033082A)
For cordless slave operation in the Metz TTL Remote-System or Metz-Auto-
matic Remote System.
• Wide-angle diffuse
(Item No. 000044217)
To cover lens focal lengths as of 20 mm. The maximum flash range is re-
duced by a factor of approx. 1.4 due to the corresponding loss of light.
• Colour filter set 44-32
(Item No. 00004432A)
Consists of 4 colour filters to achieve special lighting effects, plus a clear fil-
ter to hold colour foils in any colour.
• Mecabounce 44-90
(Item No. 000044900)
A diffuser to achieve soft illumination in the simplest possible manner. The
effect is very impressive because the pictures are given a very soft atmos-
phere. Facial colours are rendered more naturally. However, loss of light
halves the maximum flash range.
• Bounce diffuser 54-23
(Item No. 000054236)
The soft directed light diminishes dense shadows.
85

Publicité

Table des Matières
loading

Table des Matières