Setting The Flash Mode For The Slave Flash Unit On The Master; Set Exposure Correction (Ev) Or Partial Light Output For The Slave Flash Unit On The Master - Metz mecablitz 52 AF-1 Nikon digital Mode D'emploi

10.1.3 Setting the flash mode for the slave
REMOTE
M
MASTER
1/16
4 —
A • Press the
4 —
B
4 —
C
INFO AIBIC
A
—
• Press the sensor button on the touch
B
—
C
—
• Press the
Off
TTL
• Press the sensor button on the touch
M
k
EV
A
TTL
B
The selected setting is adopted.
—
C
—
REMOTE
M
MASTER
1/16
4
A TTL
4 —
B
4 —
C
INFO AIBIC
164
flash unit on the master
A I B I C
sensor buttons on the
touch display as many times as it takes for
the flash group selection to appear.
display for the desired flash group e.g.
sensor buttons on the
touch display to set the desired flash
mode.
display for the desired mode of operation
TTL M
or alternatively .
REMOTE M
MASTER 1/16
4
A TTL
4 —
B
4 —
C
INFO AIBIC
EV
A
TTL
A -
. B
—
C
—
+
1 / 3
+
2 / 3
+ 1
EV
A
TTL
+2/3
B
—
C
—
REMOTE M
MASTER 1/16
TTL I + 2 / 3
4
A
4 —
B
4 —
C
INFO AIBIC
10.1.3.1 Set exposure correction (EV) or par-
tial light output for the slave flash
unit on the master
A I B I C
• Press the sensor buttons on the
touch display as many times as it takes for
the flash group selection to appear.
• Press the sensor button on the touch
display where a correction value is to be
set.
• Press the sensor buttons on
the touch display and set the desired
correc-tion value.
• Press the sensor buttons on the touch
display for the desired correction value.
The selected setting is adopted.