Labels & Symbols - Evolution F210CMS Instructions D'origine

Noise Emission
The noise emission values have been
determined according to noise test code given
in EN 61029-1, using the basic standards EN ISO
3744 and EN ISO 11201.
Warning: Wear hearing protection!
Handling
• Handle the machine with care,
allowing the machine to do the work.
• Avoid using excessive physical effort
on any of the machines controls.
• Consider your security and stability,
and the orientation of the machine during use.
Work Surface
• Consider the work surface material;
its condition, density, strength,
rigidity and orientation.
(1.8)
LABELS & SYMBOLS
WARNING: Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools for
replacement labels.
Note: All or some of the following symbols may
appear in the manual or on the product.
Manufacturing Date Code
The manufacturing date code is the first part of
the serial number, found on the motor housing
of the machine. Evolution serial numbers begin
with the abbreviation of the machine followed
by a letter. A = January, B = February and so on.
The following 2 numbers are the year of manu-
facture. 09 = 2009, 10 = 2010, etc. (Example of
batch code: XXX-A10)
www.evolutionpowertools.com
(1.9)
Symbol
V
A
Hz
min
-1
~
Alternating Current
n o
Wear Safety Goggles
Wear Ear Protection
Wear Dust Protection
Wear Safety Gloves
Read Instructions
EAC Certification
Triman - Waste Collection
Waste Electrical &
Electronic Equipment
4
Description
Volts
Amperes
Hertz
Speed
No Load Speed
Do Not Touch
CE Certification
& Recycling
Warning
Protection Class II
Double Insulated