Key Tone - Contrast - Recall Time (Flash); Setting The Key Tone; Setting The Contrast; Setting The Recall Time (Flash) - HumanTechnik FLASHTEL COMFORT 3 BT Mode D'emploi

Settings

Key tone - Contrast - Recall time (Flash)

Setting the key tone

1. Press . „Set Display" will be shown in the display.
2. Use or
3. Press to enter the phone setting menu. "Set Ring" will be shown in the display.
4. Press . „Ringer volu." will be shown in the display.
5. Use or
6. Press to enter the key tone menu.
7. Use or
8. Press to confirm your selection.

Setting the contrast

1. Press . „Set Display" will be shown in the display.
2. Press again. „Set Language" will be shown in the display.
3. Use or
4. Press to enter the contrast selection. The set contrast level will be shown.
5. Use or
6. Press to confirm your selection.

Setting the recall time (Flash)

1. Press . „Set Display" will be shown in the display.
2. Use or
3. Press to enter the phone setting menu. "Set Ring" will be shown in the display.
4. Use or
5. Press to enter the recall time selection. „300ms" will be shown in the display.
6. Use or
7. Press to confirm your selection.
to page to „Set Phone".
to page to „Keypad Tones".
to page between "ON" and "OFF".
to page to "Set Contrast".
to page between 8 different contrast levels.
to page to „Set Phone".
to page to „Set Flash".
to page between 100ms, 300ms, and 600ms.
Italiano 45