Setting The Date Format; Setting The Flash Time; Receiving Caller Id; See Display Ads - HumanTechnik Scalla2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54

Setting the date format

1. Press "OK/MENU" to access the settings
menu.
2. Press "↑" or "↓" to move to the menu item
"Datums-Format".
3. Press "OK/MENU" to confirm your selec-
tion. The date format currently selected
will appear in the display
4. Press "↑" or "↓" to select the desired date
format (TT-MM/ MM-TT).
5. Press "OK/MENU" to confirm your selec-
tion and exit the settings menu.
Note:
The "TT-MM" shows the date as day and
month and the "MM-TT" setting shows it as
month and day.
Setting the flash time (
1. Press "OK/MENU" to access the settings
menu.
2. Press "↑" or "↓" to move to the menu item
"Flash time".
3. Press "OK/MENU" to confirm your selec-
tion. The time currently set will appear in
the display.
4. Press "↑" or "↓" to select the desired flash
time (100ms/ 120ms/ 300ms/ 600ms).
5. Press "OK/MENU" to confirm your selec-
tion and exit the settings menu.
46 English

Receiving caller ID

Caller ID consists of the following informa-
tion:
TOTAL 04 MON
JOHN SMITH
)
R

See display ads

Voicemail – If you have activated voicemail
with your telephone provider and a mes-
sage was left, "Voicemail" will appear in the
display. The voicemail symbol will also light
up on the bottom right of the telephone. The
symbol is lit until the voicemail has been
heard and stored as a call.
Note:
The function must be supported by your
telephone provider.
9:52 9/12
02
NEW
9:52 9/12
02
NEW
07621956890
MSG
AM
PM
Time and date
Total number of
new calls
Number of calls on
the caller ID list and
weekday
Telephone number
of the caller
Name of the caller
CALL #
NEW
REPEAT

Publicité

Table des Matières
loading

Table des Matières