One-Touch Dial Keys; Allocating Telephone Numbers To One-Touch Dial Keys; Using The One-Touch Dial Keys; Deleting One Of The One-Touch Dial Keys - HumanTechnik FLASHTEL COMFORT 3 BT Mode D'emploi

One-touch dial keys

Allocating telephone numbers to one-touch dial keys

The 4 speed-dial keys can be programmed with any telephone number.
1. Enter the desired telephone number on the keypad. Press
entered if necessary.
2. Press the desired one-touch dial key for longer than 3 seconds. „Number:" and the
entered telephone number will be shown in the display.
3. Press again and enter a desired name to the telephone number over the keypad.
4. Press the corresponding key as frequently as necessary to select the desired letter (see
table on page 36). Press
5. Press to confirm your name entry and switch to the selection of the ringtone for the
entry.
6. Use or
7. Press to assign the selected number to the corresponding location.

Using the one-touch dial keys

Take the handset from the cradle or press either the
If you press one of the keys marked
be dialed automatically.

Deleting one of the one-touch dial keys

1. Press . The first entry in the telephone book will be shown.
2. Use or
dial entries are marked with M1...M4.
3. Press .
4. "Edit" will be shown in the telephone display.
5. Use or
6. Press after you have chosen "Erase".
7. The telephone number is deleted from the one-touch dial key and from the telephone book.
40 Italiano
to delete the last letter entered if necessary.
to page between the ringtones.
to page to the desired one-touch dial entry in the phonebook. One-touch
to page between "Edit" and "Erase".
button or the
... the telephone number stored for that key will
to delete the last digit
button.