grandimpianti C 200/51 Instructions Pour L'installation Et Mode D'emploi page 52

3. TECHNICAL NOTICE FOR THE USER
Important note:
All apparatus of type Ø50-2000, 2600 and 3300 is for use by professionals, and must only
be used by qualified staff.
The apparatus must be installed in accordance with currently applicable regulations and
standards, in well ventilated premises and by a qualified installer.
An identification plate attached to the top of the left panel provides information on the
following:
The type of apparatus.

 Its manufacture number.
Its power supply and electrical power.

 Pressure and flow in the case of steam heating.
 Pressure, gas power, flow, type of gas, type of connection, country of destination,
apparatus performance, category, in the case of gas heating.
If the apparatus is to be used with a gas other than that for which it was designed, a qualified
installer must be addressed to carry out the necessary modifications.
3.1 Daily use (see CHAPTER 4: use of EASY CONTROL)
 Turn the lockable selector to position 1.
Press the START button.

 Check the rotation of the belts.
Choose an ironing speed from 1 to 7 (0 to use the "SMART SYSTEM" option). Note:

the chosen speed is only relevant beyond 130°C.
 Set the temperature in accordance with the humidity and type of laundry to be ironed
(in the case of steam heated machines, no temperature regulation is possible, as the
temperature depends directly on the steam pressure -10bars=180°C).
Important: the operating temperature varies in accordance with the fabric to be
ironed, but it must never continuously exceed 180°C. A previously adjusted safety
thermostat situated inside the machine serves to palliate any fault in the regulation
system.
DOC MACHINE Ø50.0-EN by PS on 19/06/2015, Page 18 of 33