grandimpianti C 200/51 Instructions Pour L'installation Et Mode D'emploi page 49

First start-up
 At the first start-up, ensure that the machine is stable and level.
Check that all the connections and exhausts are appropriately completed.

 Check the satisfactory earthing of the machine.
 Turn the lockable selector on the left panel to position 1 and check that the start light
of the micro-processor is on.
 Press the START button.
 Check the rotation and correct direction of the demister extraction ventilators (arrow
on the motor).
 Check the rotation and correct direction of the belts (rotation towards the inside of
the machine).
Attention: take care not to touch or approach a moving part.
Re-assemble all the housings on the machine.

 Check the temperature settings of the unit.
Adjust the temperature setting (or steam input pressure) according to the laundry to

be ironed.
 Proceed with the ironing tests; the laundry must come out dry and perfectly pressed.
If not, increase the temperature or slow down the ironing speed.
Attention: as the cylinder is paraffined as it leaves the factory, carry out a first ironing test
with old laundry.
DOC MACHINE Ø50.0-EN by PS on 19/06/2015, Page 15 of 33