Scheduled Maintenance; Replacement Parts - Solo 468 Notice Originale

9.6 Scheduled maintenance

The following information is based on standard operating conditions.
For special conditions, such as prolonged daily use, the recommended maintenance
intervals should be reduced accordingly.
Implement all maintenance jobs regularly. If required, authorise a specialist service
centre to maintain the machine for you. The owner of the machine is responsible for:
 Any damage caused by a lack of maintenance, incorrect or late maintenance
and repairs
 Consequential losses - including corrosion - from incorrect storage
Carburettor
Air filter
Spark plug
All accessible screws
(except for adjusting screws)
Controls
(stop switch, throttle lever, starter)
Silencer
Air inlet
(Protection screen)
Complete machine
Furthermore, as part of the annual service at an authorised dealer, request the following services:
 Complete check of the entire machine
 Professional cleaning of the engine (fuel tank, cylinder head fins, ...)
 Check and, if necessary, replace wearing parts, particularly the annual fuel filter change
 Optimum setting of the carburettor

9.7 Replacement parts

Dependable operation and the safety of your device also depend on the quality of the replacement parts
that you use. Use only original SOLO replacement parts. Only original parts come from the production of
the device and thus guarantee the highest possible material quality, dimensional accuracy, function, and
safety. Original replacement parts and accessory parts are available from your dealer. He also maintains
the requisite replacement part lists to determine the required replacement part numbers, and he is
constantly provided with information concerning detail improvements and innovations in the replacement
part offering. Please note as well that guarantee performances from SOLO are not possible if parts other
than SOLO original parts are used.
Check idling speed
Adjust idling speed
Clean
Replace
Check electrode gap and replace spark plug if
required
Replace
Retighten
Check function
Visual inspection
Clean
Visual inspection
Clean
Maintenance and care
X
X
X
X
X X
X X
X X X
X
X
X X X
X
X X X
ENGLISH 11