Solo 468 Notice Originale page 17

Completely assembly the leaf blower before its first use:
Fig. 2
Fig. 3
Push pleated elbow tube (17) onto blower elbow (16) and secure with clamp (C).
Push multi-function handle (D) onto blower tube l (18) and fix with 2 screws in the required, comfortable
position. The adjustment scope is approx. 50mm depending on the arm length of the operator.
Push blower tube l (18) into pleated elbow tube (17) and secure with plastic clamp (E).
Note: With the multi-function handle the blower tube can now be twisted and swiveled in the pleated
blower elbow. Ensure that no cables are disconnected when testing this feature.
Insert extension tube ll (19) in blower tube l (18) and secure with twist lock.
Push curved nozzle tube (20) on extension tube ll (19)and also secure with twist lock.
5. Assembly
The blower elbow (16) is already fixed in the
blower housing (15) with the two screws (A+B).
Ensure the elbow can swivel easily.
Assembly
ENGLISH 5