Power Settings; Two Cooking Zones Behind Each Other; Switch-Off Timer - Pelgrim IDK584 Notice D'utilisation

Masquer les pouces Voir aussi pour IDK584:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

operation

Power settings

Two cooking zones behind each other

Switch-off timer

The power, depending on the diameter of the zone, is adjustable
between 50 and 3100 Watts. See the table below.
Diameter
Power setting
Ø 180 mm
50 - 2800 W
Ø 210 mm
50 - 3100 W
• T wo cooking zones one in front of the other are operated by one
generator. The advantage of this is that a high power level can
be realised for a cooking zone. This is ideal for bringing food and
liquids to the boil very quickly, for frying and for searing large
quantities.
• The generator divides the power between both zones. Up until
setting 5, this has no consequences. However, if a higher setting is
used then the other cooking zone will automatically be restricted.
• If you set one of the zones to a higher level then you must first
switch the other zone to a lower setting.
• Maximum combinations
1st zone
5
2nd zone
b
• T wo cooking zones that are beside each other do not influence
each other. You can set both cooking zones to a high setting at the
same time.
You can use the switch-off timer to switch off one of the cooking zones
automatically.
• Use the timer button to choose the cooking zone that must be
switched off. The square brackets indicate the cooking zone to
which the timer is or can be linked.
• Press the timer button repeatedly to select the correct zone.
The timer can be linked to an arbitrary cooking zone.
• You can also use the timer as a standard kitchen timer without
having to use the hob (only for IDK564).
6
7
8
9
8
7
9
b
6
5
GB 15

Publicité

Table des Matières

Dépannage

loading

Ce manuel est également adapté pour:

Idk564

Table des Matières