Installation; What You Need To Consider - Pelgrim IDK584 Notice D'utilisation

installation

What you need to consider

* IDK584 min. 770 mm
IDK564 min. 580 mm
Safety instructions for the installation
• The connection must comply with national and local regulations.
• The appliance must always be earthed.
• T his appliance may only be connected by a competent electrical
installer.
• T he connection cable must hang freely and is not to be fed through
a drawer.
• I f you want to make a fixed connection, make sure that a multi-
polar switch with a contact separation of at least 3 mm is fitted in
the supply line.
• The worktop the hob is built into must be flat.
• T he walls and the worktop surrounding the appliance must be heat
resistant up to at least 85 °C. Even though the appliance itself does
not get hot, the heat of the hot pan could discolour or deform the
wall.
• D amage caused by incorrect connection, installation or use, will not
be covered by the guarantee.
Clearance
Sufficient all-round clearance is essential to the safe use of the hob.
Check that there is enough clearance.
cabinet
cooker hood
hob
side wall
GB 23