Before Using The Kr111; Connections; Connecting The Pedal Cable; Connecting The Power Cord - Roland KR-111 Mode D'emploi

KR111 Digital Intelligent Piano

Before using the KR111

3. Before using the KR111

Connections

Connecting the pedal cable

Insert the pedal cable into the
[Pedal] connector on the bottom
panel of the KR111.

Connecting the power cord

Insert the included power cable into the AC inlet on the
KR111, and then plug it into an electrical outlet.
Be sure to use the supplied power cord.

Setting up the music stand

Set up the music stand as shown in the figure below.
Fold the three supporting feet at the back of the
stand and check whether the stand is held in place.
Before moving the KR111, be sure to lower the music
stand as a safety precaution.
12

Opening/closing the keyboard lid

(1) When opening the KR111's lid, grasp it with both
hands and gently lift it upwards, then slide it
towards the back of the piano.
(2) When closing the lid, slowly pull it forward, then
gently lower it into place.
Never insert your hands between the lid and the key-
board.
Take care not to allow fingers to be caught or
pinched when opening and closing the lid. Make sure
an adult is on hand to provide assistance when
young children are playing the KR111.
For safety, transport the KR111 only with the lid in
the closed position.