Roland KR-111 Mode D'emploi page 53

(3) Use the [√][®] buttons to select the following
parameter:
LOAD SET
(4) Press the [Enter] button.
The display now shows the number and name of the
first User Program set on floppy disk (if available).
My Set
(5) Use [+][–] to select the User Program set you wish to
load.
The Ent message next to it starts flashing.
(6) Press the [Enter] button to load the selected file.
Note: Press [Exit] if you do not want to load the selected file
after all.
If you pressed [Enter], the display now shows the
"Loading" message. When the data have been
loaded, the "Complete" message briefly appears.
(7) Press the [Exit] button to leave this function.
120 Ent
=
Exit Enter
120 Ent
=
KR111 Digital Intelligent Piano
Managing your User Programs
r
51