201575 Assemblage et câblage du
connecteur du transducteur
Outer screen together with inner screen.
Drain wire, fold back over jacket
and temporary fastened with tape.
Heat-shrinkable tubing
All measurements in mm.
The drawing is not in scale.
394149/C
Upper plug case
Plug
fastening ring
Contact body
Retaining ring
Lower plug case
Washers
Bottom cap
and cable clamp
Rubber sleeve
Outer screen and inner screen braid wire
untaped and spread out under washer
Rubber sleeve
CD12_201575_001_001
Drawing file
[824-201575] Rev .C
215