Globus MY STIM Manuel D'utilisation page 86

USE OF THE MOTOR POINTS FINDER*
User manual:
1) Connect the cable with the red pin to the finder and the black pin to an electrode.
2) Place the electrode on the interested muscle following the location shown with a (-) symbol
(negative) in the corresponding picture of the electrode placement section in the electro sti-
mulator user manual.
3) The Motor point is in the zone shown with a (+) symbol (positive) in the corresponding pic-
ture of the electrode placement section in the electro stimulator user manual.
4) We suggest applying conductive gel to ease the search of the motor point.
5) After connecting the cable to the electro stimulator, select the program "Search Motor
points" and progressively increase the intensity (5-10mA).
6) Slightly press the finder on the skin and move it around the research area. The motor point
should be where the electric intensity feeling is the highest.
7) After reducing the intensity, disconnect the finder and connect another electrode which
must be placed at the exact location where the finder found the motor point.
86
The Motor point finder is used to locate the exact position where to place the electrodes to
ensure maximum muscle contraction.
*The Motor point finder is a GLOBUS accessory not included and available at any Globus dea-
ler.
Multi_Elite_Mystim_Rev. 09.14 data di emissione 29_09_14