Güde GFO 1401 Mode D'emploi page 21


Deviation
Faulty setting of the saw blade

Resin
Dried resin in the timber

Workpiece
An object which is cut or split.
Different risks and proper
protection
Mechanical risks
Cutting, cutting off
Danger of rotating parts:
Take particular safety precautions while working
with small workpieces. Always use feeding
adapter, which is part of the delivery. Worn out or
damaged part hast to be replaced immediately.
Contact with rotating saw blade can result in
serious bodily injury. Never touch the saw
blade while rotating.
Winding up, catch in
Loose clothing, bracelets and long hair may
be caught in the rotating parts.
Use skin tight apparel and remove the
bracelets and similar objects. Cover your hair
by a hairnet.
Electrical risks
Direct contact with the electric
current.
Damaged cord or plug can cause electric
shock.
Replace damaged cords or plugs by an expert.
Use the tool only when it is equipped by a safety
switch. (FI)
Nondirect contact with the electric
current
Injuries caused by conductible parts on
exposed or damaged components.
Always unplug the cord while doing
maintanence. Operate only with safety switch
FI.
Injuries caused by noise
Hearing damage
Longlasting work with the tool can result in
hearing damage.
Always use ear protection
Injuries caused by materials or
othe substances
Contact, breath in
High dustness can result in lungs damage. It
is caused by operation without dust suction.
Wear respirator while working with the tool.
Connect the dust sucking unit and use it.
Neglecting the ergonomic rules
Careless using of personal safety
gear
Operating the tool without proper protective
gear can result in serius bodily injury. Always
use recommended apparel and with
concentration and forethought.
Inadequate local lighting
Ineadequate local lighting represents great
safety risk.
Confirm while operating the tool that the
lighting is sufficient.
Other risks
Fling away objects
While cutting the saw or mechanical particals
can damage your eyes. Always wear safety
goggles.
Liquidation
Follow the pictograms on the wrapping or casing.
Description of their meaning you can find in the
chapter "Symbols explanation"
Operation requierements
Operator must read and understand this
instruction manual thoroughly.
Qualification
Except detailed training by a skilled person no
other special qualification is necessary to operate
this tool.
Operator´s age
Operator must be at least 16 years old. Except
the youths under training and supervised by an
instructor.
Training
Operating this tool requires only short training.
Special training is not necessary.
Technical data
Power source:
Max. output:
Revolutions:
Protection:
Protection category:
Diameter of saw blade:
Max. cutting depth at 0°/0°:
Max. cutting depth at 45°/45°:
Max. cutting depth at 45°/0° left:
Max. cutting depth at 45°/0°right:
Weight cca.:
10
230 V/50 Hz
1800 W/P1
4200 min-1
IP 33
II
254 x 20 mm/60 Z
65 x 155 mm
40 x 120 mm
40 x 155 mm
65 x 105 mm
30 kg