Güde GFO 1401 Mode D'emploi page 17

Masquer les pouces Voir aussi pour GFO 1401:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
The tool
Table, bevel slide miter saw GFO 1801
High quality, solid saw for carpenter, bevel
and miter work.
Equipment (serial):
Saw blade smoothly tilts thanks to fastening
lever. Turntable with raster, dust sucking unit,
saw blade guard, sack for collected dust,
folding legs with minimum space demand,
including parallel and bevel ruler.
Area of use:
Ideal for building sites and for interior do ups.
Delivery range (pict. 1+2)
1. sawdust cover
2. fastening screw of clamping guard
3. feeding adapter for workpieces
4. parallel leading ruler
5. saw blade guard
6. bevel ruler
7. workpiece vise assembly
Machine description
(pict. 3)
1. holing prop
2. dust bag
3. saw blade guard
4. adjustabel wheels
5. emergency trigger switch
6. tool legs
Guarantees
Power demands see accompanying guarantee
card
Overall safety rules
Read the instruction manual prior to running this
tool. If any doubts while turning on or operating
this tool, contact the manufacturer (Service
center).
To achieve high safety level, observe
carefully following instructions:
Attention: operate with FI (PRCD) only.
(protective switch against fault current)!
Attention!
Keep the workplace clean and tidy.
Disorder on the workplace increases
danger of an accident and injury.
Watch surrounding conditions you are
working in. Never use electric devices and
cutting tools in damp and wet
environment. Ensure proper lighting.
Don't expose electric devices to rain or to
environment with high humidity. Don't
turn on the electric devices in
environment rich in flammable liquids or
gases.
Keep unauthorized persons out. Visitors,
children in the first place and sick and
feeble people should not have access to
the workplace.
Ensure that tools are stored properly.
Tools not in use should be kept in dry and
elevated place if possible, with restricted
access.
For each job use appropriate tools. Don't
use e.g. light tools for a job that needs
heavy ones. Use the tool for a purpose
that it was designed for. Keep your tools
clean and properly sharp.
Use adequate apparel. Don't wear loose
clothes or pendants, which may get
caught in. If working outdoor we
recommend working gloves and nonslip
footwear. Long hair need to be covered
properly.
Use personal safety gear. Always wear
safety goggles and ear plugs. Also
respirator is needed. While working with
sharp blades and saw blades, tight gloves
are necessary.
Use dust sucking unit. It is available, but
needs to be plugged in correctly. Take
care that dust and sawdust is going away
from you or people nearby.
Take care of power cord. Don't pull it.
While plugging it out of the receptacle,
pull on the head. Don't put the cord close
to heat sources. Keep it out from oil and
sharp edges.
Tight up the workpiece properly. Use
appropriate clamps, clips, etc. It is always
safer then using your hand. Besides you
will have your hands free to work.
Ensure proper footing and not loosing the
balance. Don't overreach too much
forward or sideway.
Remove adjusting key, etc. All keys
needed for adjusting must be removed
from the tool before you turn it on.
Avoid unintentional starting. Always
confirm that the switch is in the OFF
position when plugging in the tool..
6

Publicité

Table des Matières
loading

Table des Matières