Standard Operating Procedure For Automatic Programs - Redmond RMC-M4502FR Manuel D'utilisation

Standard Operating Procedure for Automatic Programs

1. Measure the ingredients according to the recipe.
2. Fill the bowl with ingredients. Make sure that all ingredients including liquid are below the scale mark indicating maximum capacity. Place
the bowl inside the device fitting it tightly with the heating element.
3. Close the lid until it clicks into place. Plug in the unit.
4. Press "Menu" button repeatedly to select the cooking program (corresponding indicator lights up).
5. Select the corresponding subprogram using the "Produit" (for "MULTICOOK", "VAPEUR", and "FRIRE") or "Cuisson seule" button (for "CUISSON
SEULE"). Each subprogram features its own default time which is being displayed.
6. Adjust the time set by default if necessary (p. 27). Set Preset function if necessary. Preset function is not available in "FRIRE" and "PÂTES"
programs.
7. Press "Départ" to activate the program selected. "Départ" button indicator lights up. Set program starts running and the countdown begins. "VAPEUR"
program countdown begins only when the water comes to a full boil providing enough steam; "MULTICOOK" and "FRIRE" countdown begins when the
device reaches its operating temperature; "PÂTES" – when the water comes to a full boil, ingredients are added, and "Départ" button is being repressed.
8. When cooking time expires the device makes an audible sound and automatically switches to "Keep warm" ("Réchauffer/Annuler" button indicator
lights up).
9. To interrupt or to cancel the program or to disable the Keep warm function press "Réchauffer/Annuler".
To achieve best results we recommend you to consult the cookbook with 100 recipes adjusted for the device.
If you did not manage to achieve the desired result with automatic cooking programs try using "MULTICOOK" featuring a wider manual time and temperature
adjustment range.
"MULTICOOK"
This program is recommended for cooking any dish of your choice using your own time and temperature settings. Thanks to the versatile program
"MULTICOOK" installed, the device will replace a big number of kitchen appliances. Now you can control cooking time and temperature adjusting
any recipe, either from your family cookbook or Internet for the multicooker. The device also allows selecting the cooking time set by default depending
on the type of the product used (vegetables, fish, or meat). Default time depends on the type of the product selected: "LÉGUMES" ("VEGETABLES")
– 15 minutes, "POISSON" ("FISH") – 20 minutes, "VIANDE" ("MEAT") – 40 minutes. Default temperature is 160°C.
Manual time adjustment range is from 5 minutes to 12 hours with the following intervals:
1 minute – less than 1 hour; 5 minutes – from 1 to 12 hours. Manual temperature adjustment range (use "Température" button to adjust) is from 40
to 160°C with 20°C intervals.
"MULTICOOK", featured by REDMOND RMC-M4502FR allows preparing a big variety of different foods. Consult the table of "MULTICOOK" Temperature
Adjustment Recommendations (p. 36) and the recipe book provided when using the program.
RMC-M4502FR
GBR
29