Device Overview; Accessories; Before Initial Use - Cleanmaxx 00877 Mode D'emploi

EN

Device Overview

10
19
18

Accessories

• Turbo nozzle (9) is designed for vacuuming fl oors. It has a rotating cleaning brush to
make it easier to pick up hair and fl uff.
• Brush nozzle (4) is used for vacuuming upholstery and textiles and for removing dust
from delicate objects such as picture frames, lamp shades, keyboards, books etc.
• Crevice nozzle (1) is ideal for places which are hard to get to, such as corners, crev-
ices or recesses.
• Nozzle adapter (7) is required to attach all nozzles, with the exception of the turbo
nozzle, to the device or extension tube.
• Wall bracket is ideal for a space-saving storage of the device.

Before Initial Use

1. Check the items supplied for completeness (see the"Items Supplied" chapter) and
possible transport damage. If you fi nd any damage to the components, do not use
the device (!), but contact our customer service department.
2. Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.
Never remove the rating plate and any possible warnings!
3. Fully charge up the battery (see the "Charging Up the Battery" chapter).
4. Attach the wall bracket (see the "Attaching the Wall Bracket" chapter).
11
12
17
• Furniture edge brush (3) with a joint is designed for cleaning
the tops of cupboards (see photo).
• Extension tube (6) to make it easier to reach the tops of cup-
boards, ceilings and corners and, along with the turbo noz-
zle, for cleaning fl oors.
20
10 Release button
11 Control lamps (1 red
13
12 On / Off switch
13 Handle
14
14 Motor unit
15 Battery (on the bottom)
16 Ventilation openings
17 Filter holder
15
18 Dust container
16
19 Suction opening
operating lamp, 2 green
battery charge status
lamps)