Switch Off; Replace Battery; Faults, Causes And Remedies - Soehnle Professional Multina Comfort Mode D'emploi

2. 9 Switch Off

Switch off the baby scale by pressing ON / OFF / TARA button at display "0.00" or automatically
after 2 minutes.

2.10 Replace battery

It can be zinc-/coal- and alkaline/manganese batteries and nickel-cadmium and nickel-metal-
hydride rechargeable batteries.
In order to change the battery, open the battery compartment on the underside of the baby
scale.
3. FAULTS – CAUSES AND REMEDIES
DISPLAY
If the fault cannot be cleared, or other error messages appear, please contact your service
partner.
www.soehnle-professional.com
CAUSES
Underload: only dashes appear at the bottom
of the display field.
Overload: only dashes appear at the top of
the display field. Maximum weighing range is
exceeded.
The battery is empty.
No standstill of scale.
REMEDY
Switch the scale off and on again. If
the error occurs again, please contact
your service partner.
Unload the scale, or switch them off
and on again. Check the maximum
weighing range.
Replace the battery.
Check the surface and the leveling of
the weighing platform. Check the
scale on a force shunt. If the error
message after the realignment
persists, contact your service
provider.
14