Basic Safety Instructions - Burkert 8690 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Basic Safety instructions

3.
Basic safeTy
insTrucTiOns
These safety instructions do not make allowance for any
contingencies and events which may arise during the installation,
operation and maintenance of the devices.
local safety regulations, whereby the operator is responsible for their
compliance, by the installation personnel too.
Danger!
danger – high pressure!
Before dismounting pneumatic lines and valves, turn off the
pressure and vent the lines.
risk of electric shock!
Before reaching into the device or the equipment,
power supply and secure to prevent reactivation!
Observe applicable accident prevention and safety regulations
for electrical equipment!
Type 8690
switch off the
warning!
general hazardous situations.
To prevent injury, ensure:
that the system cannot be activated unintentionally.
Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
The device may be operated only when in perfect condition and
in consideration of the operating instructions.
The general rules of technology apply to application planning
and operation of the device.
The Pneumatic Control Unit Type 8690 was developed with
due consideration given to the accepted safety rules and
is state-of-the-art. Nevertheless, dangerous situations may
occur.
Failure to observe this operating manual and its operating instructions
as well as unauthorized tampering with the device release us from
any liability and also invalidate the warranty covering the devices and
accessories!
english
7

Publicité

Table des Matières
loading

Table des Matières