Frequently Asked Questions (Faqs) - Marmitek BOOMBOOM 100 Guide Utilisateur

Output
Interface Audio output
Electrical Performance—audio RL (1kHz tone / A-weight / 2 Vrms)
Audio Input Level (Max)
Audio output level (nominal)
Audio frequency range
Dynamic range
Channel Separation Audio R/L
Toslink
Golflengte (nominal)
Light output (nominal)
Physical
Operation
Light Indicator
size (W x D x H)
Weight
Operation temperature
Storage temperature
With a view to further improving the product, Marmitek retains the right to
change specifications and/or designs without prior notice.
7

Frequently asked questions (FAQs)

The BoomBoom 100 is plugged in, but won't turn on
1. Please ensure that the BoomBoom 100 is powered using the
supplied USB cable.
2. Please ensure that the BoomBoom 100 is switched on in RX
or TX mode.
I cannot connect the BoomBoom 100 to my Bluetooth device.
Please ensure that the TX/RX switch is in the correct position.
TX mode: the BoomBoom 100 can only connect to receiving
Bluetooth devices such as a pair of headphones, speaker or
Bluetooth receiver.
RX mode: the BoomBoom 100 can only connect to transmitting
Bluetooth devices such as a pair of smartphone, tablet or
computer.
BoomBoom 100
Jack 3.5 mm stereo
Toslink Digital stereo
1.2V (rms)
2 +/- 10% V (rms)
20Hz ~ 48kHz
typ. 95 dBA
≧ 85 dB
640 ~670 nm
-17 dBm
on headphones or audio source
3 color LED (blue / green / red)
105 x 25 x 20 mm
25 g
-10°C ~ +55°C
-20°C tot +70°C
13