Marmitek BOOMBOOM 100 Guide Utilisateur page 7

C
Mini-jack adapter cable
This cable enables you to connect the BoomBoom 100 to the
audio input/output (right-left) of your TV or audio system.
D
Mini jack cable
Use the mini jack cable if no Toslink connector is available on the
audio system or TV. This cable is plugged into the
BoomBoom 100's audio input/output (3 / 7) and is then connected
to C.
E
Toslink cable
This cable is plugged into the BoomBoom 100's audio input/output
(5 / 6) and provides the most optimal audio connection (fully
digital).
F
Double-sided mounting tape
This adhesive tape enables you to install the BoomBoom 100 in a
permanent location.
G
USB power adapter
Connect B to G and power the BoomBoom 100.
BoomBoom 100 7