ProMinent DULCOMETER D1C Série Mode D'emploi page 35

Maintenance / Repair
Fuse change D1C W:
• The above-specified safety measures must be implemented (disconnection from mains!) before replacing
the device fuse:
The mains power fuse is located in a closed fuse holder (6) in the terminal box.
Open device and set in "park position"
Release bayonet catches of fuse holder
Remove fuse and replace by new fuse
Lock bayonet catch and close housing
Upper section of housing
Item (1) Electrical assembly, display
Item (2) Ribbon cable
Item (3) Electrical assembly I/O/S
inside
1
2
Lower section of housing
inside
4 3
......
D1C-..
FW-_._
Item (4) Ribbon cable
Item (5) Electrical assembly, processor
Item (6) Fuse holder
5 6
Sectional
side view
DED1C1W010
35