HYDROLAB Surveyor HL Manuel D'utilisation page 22

6. To change the view options, push
Option
Select Parameters Sets the parameters that show on the graph (maximum of two). Push OK to select a
Parameter Units
Step Size
Go to Time
Zoom
Y-Axis Scale
Line Weight
Color
Grid
Log Details
7. To look at the measurements on the graph for a specific date and time, push the LEFT or RIGHT
arrow to move the cursor to the applicable date and time.
8. To look at all the measurements for the selected date and time, push OK.
9. Push to go out of the log file.
Copy the log files to a PC
Copy the log files to a PC as necessary to use the Hydrolab Operating Software to:
• Look at the log files
• Save the log files as comma-separated (.csv) text files
• Send the log files to a printer
1. Connect the instrument to the PC. Refer to
2. Click Overview in the navigation bar. A list of the log files kept on the instrument show in the right
pane.
3. Select a log file, then click Transfer.
Note: To select more than one log file, use the Ctrl or Shift key.
4. Select a folder on the PC, then click Save.
5. When done, disconnect the instrument from the PC as necessary. Refer to
on page 23.
Connect to a PC
Items to collect:
• PC with Hydrolab Operating Software
• USB cable with mini-USB connector
1. Set the instrument power to on.
2. Connect the instrument to the PC with the supplied USB cable. Refer to
Note: The standard-size USB connection on the instrument is only for use with the communications modules.
No other USB devices are supported.
3. At initial installation and each time a different USB port on the PC is used:
a. Windows prompts that a new device is found and opens a wizard window. Select No, not this
time to search for software, then click Next.
22 English
. Select an option, then push OK.
Description
parameter.
Sets the measurement units that show on the graph.
Sets the number of data points the cursor (blue, vertical line) moves on the graph when
the LEFT and RIGHT arrows are pushed.
Moves the cursor to the date and time selected.
Sets the measurement interval that show on the graph (1 second minimum).
Sets the minimum and maximum values of the Y-axis.
Sets the thickness (weight) of the lines in the graph.
Sets the color of the graph lines.
Set the graph grid to on or off.
Shows the log details.
Connect to a PC on page 22.
Disconnect from a PC
Figure 10.