The Seca 360° Wireless Network; Introduction; Seca Wireless Groups - Seca 264 Mode D'emploi

6. THE SECA 360° WIRELESS NETWORK

6.1 Introduction

seca wireless groups

0
1
66 •
This device is equipped with a wireless module. The
wireless module allows measured results to be
transmitted wirelessly for analysis and documentation.
Data can be transmitted to the following devices:
• seca wireless printer
• PC with seca USB wireless module
The wireless network
wireless groups. A wireless group is a virtual group of
transmitters and receivers. If you wish to operate
several transmitters and receivers of the same type, up
to 3 wireless groups (0, 1, 2) can be set up with this
device.
The set-up of several wireless groups ensures the
reliable transmission of measured values with the
correct address when using more than one
examination room, each with similar equipment.
The maximum distance between transmitters and
receivers is approx. 10 metres. This range may be
reduced under certain local conditions, e.g. thickness
and quality of walls.
The following combination of devices is possible for
each wireless group:
• 1 set of baby scales
• 1 set of personal scales
• 1 length measuring rod
• 1 seca wireless printer
• 1 PC with seca USB wireless module
seca 360° wireless
operates with