Seca 264 Mode D'emploi page 69

3. Select the "rF" item from the menu.
4. Confirm the selection.
5. Select the "lrn" (learn) menu item.
6. Confirm the selection.
The wireless group currently set (here: wireless
group 0 "ID 0") is displayed.
If the wireless group "0" already exists and you wish
to set up another wireless group with this device,
use the arrow keys to select another ID (here:
wireless group 1 "ID 1").
7. Confirm your selection for the wireless group.
The device suggests a channel number for channel
1 (here C1 "0").
You can either accept the channel number
suggested or select another channel number using
the arrow keys.
8. Confirm your selection for channel 1.
The device suggests channel number for channel 2
(here C2 "30").
You can either accept the channel number
suggested or select another channel number using
the arrow keys.
NOTE
Two-digit channel numbers are displayed
without a space. The display "C230" means:
channel "2", channel number "30".
9. Confirm your selection for channel 2.
The device suggests a channel number for channel
3 (here C3 "60").
You can either accept the channel number
suggested or select another channel number using
the arrow keys.
10. Confirm your selection for channel 3.
StOp
The message appears in the display.
The device is waiting for signals from other devices
with wireless transmission capability within range.
The seca 360° wireless network • 69
English