Installing The Slot Bolts - Seca 264 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 79

Installing the slot bolts

54 •
4. Remove the slot bolts from the wall brackets.
5. Mount the wall brackets using the screws (M6x60).
6. Use a spirit level to align the wall brackets
perpendicularly with each other.
7. Tighten the screws of the wall brackets.
To install the slot bolts, proceed as follows:
1. Insert the slot bolts into the groove of the column
elements.
2. Position the slot bolts in the groove:
– The distance between the slot bolts must
correspond to the spacing between the wall
brackets.
– The heel stop must be on the floor when the
device is positioned in the wall brackets.
3. Use an open-ended spanner (size 13) to tighten the
slot bolts in the groove.

Publicité

Table des Matières
loading

Table des Matières