Additional Functions (Menu); Navigate Within The Menu - Seca 264 Mode D'emploi

5.2 Additional functions (menu)

Navigate within the
62 •
Additional functions are available in the device's menu.
This allows you to configure the device to suit your own
needs perfectly.
Beep
CAL
rF*
Reset
LCD
Unit
End
* The menu item "rF" is described in section
"Operating the device in a wireless group (menu)" on
page 68.
1. Press the Start key
menu
"----" appears in the display.
2. Hold down the Enter key (send/print) and the
arrow key (hold/zero) simultaneously.
The last menu item selected is shown in the display
(here: "bEEP").
3. Keep pressing the arrow key (hold/zero) until the
required menu item appears in the display (here:
"LCD" display settings).
4. Confirm your selection with the Enter key (send/
print).
The current setting for the menu item or a submenu
is displayed (here: duration of display backlighting
"dur").
• on
• off
No
Yes Auto
....
• Short
Duration
• Long
• 50 %
• 100%
Brightness
• off
• cm
• ft:in
of the head slide.