Perform All Maintenance Operations In Sequence; Periodic Maintenance - Fimap FM 1500 S-V Manuel D'utilisation Et D'entretien

PERFORM ALL MAINTENANCE OPERATIONS IN SEQUENCE

DISASSEMBLING THE BRUSHES-PAD HOLDER
1.Make sure the power supply cable is unplugged from the mains socket
2.Check that the handlebars are in the rest position
3.Tilt the machine until bringing the handlebars down to the ground, by putting a foot into the rear
of the base body
WARNING: This operation must be carried
out using gloves to protect against contact
with dangerous solutions.
4.Use the supplied handle to loosen the male center lock by turning it counter clockwise
5.Remove the pad from the pad holder
6.Screw the male center lock by turning it counter clockwise and lock it with the handle
REAR - SIDE WHEEL ADJUSTMENT
Check the rear (1) and side (2) wheels adjustment to ensure the machine works perfectly.
WARNING: Have the rear and side wheels
adjusted by a qualified technician to avoid
irreparable damages to the machine.

PERIODIC MAINTENANCE

28