Identification Data; Technical Description; Intended Use; Safety - Fimap FM 1500 S-V Manuel D'utilisation Et D'entretien

Table des Matières

Les langues disponibles

For technical assistance or to request replacement parts, always give the model, the version and serial number written on the serial number

plate.

This appliance has been built for the professional cleaning of indoor hard vinyl floors, to be carried out by following the instructions. The

appliance must only be used for this purpose.

This appliance was designed and built to be used by a qualified

operator to clean smooth, compact flooring in the commercial,

residential and industrial sectors, in proven safety conditions.

Operator cooperation is paramount for accident prevention. No

accident prevention programme can be effective without the full

co-operation of the operator who is directly responsible for machine

operation. The majority of occupational accidents that happen both

in the workplace or whilst moving are caused by failure to respect

The serial number plate is located on the lower part of the machine

chassis, and indicates the general characteristics of the appliance,

in particular the appliance's serial number. The serial number is a

very important piece of information and should always be provided

together with any request for assistance or when purchasing spare

parts.

TECHNICAL DATA

Working width

Brush rotations

Brush motor power

Brush motor voltage

Brush motor frequency

Maximum gradient with full load

Rear wheel diameter

Machine length

Machine height at motor

Machine height at shaft

Machine width

Machine service weight (without solution tank)

Length of power supply cable