Preparing To Work - Fimap FM 1500 S-V Manuel D'utilisation Et D'entretien

PREPARING TO WORK

1.Make sure the power supply cable is not damaged
2.Plug the power supply cable of the machine into the mains socket
3.Bring the handlebar into work position by acting on the release lever
MANOEUVRABILITY OF THE MACHINE
The first time an operator uses the machine, he/she should become familiar with the movements to
be imparted to the shaft in order to be confident enough with the directionality of movement of the
machine, and should therefore not operate the machine near people or obstacles.
Work in slow movements to the right and left, possibly moving back so that the operator always
stands on an area of the floor yet to be cleaned up.
Keep the power supply cable behind the operator, taking care not to operate the machine in its
vicinity in order not to damage it.
Do not insist too much on the same area so as to avoid damaging the floor, also in function of the
type of brush or abrasive floor pad chosen.
In operation, the machine moves to the right by slightly lifting the handlebars.
In operation, the machine moves to the left by slightly lowering the handlebars.
26