Use And Control / Before Use / Starting The Appliance / Temperature Control; Internal Parts - BORETTI BRVA88 Notice D'emploi

Before Use
Wait 4 hours before connecting the
appliance to allow the oil to flow back in
the compressor.
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand-new product,
then dry thoroughly.
Do not use detergents or
abrasive powders, as these will
damage the finish.
Remove safety elements used for
transportation.
Starting the appliance
Insert the plug into the wall socket and
turn the thermostat knob clockwise
beyond position «O» (OFF).
The thermostat control situated inside
the fridge compartment regulates the
temperature of the appliance.
Turn the thermostat control to the
required setting.
Use and Control
Temperature Control
The
significance in respect of the interior
temperature:
Ambient temperature
Quantity and temperature of the food
stored;
Frequency with which the door is
opened and how long it is left open
the location of the appliance.
The temperature inside the appliance
is automatically adjusted.
Setting "1" = hightest temperature,
warmest setting
Setting "6" = lowest temperature,
coldest setting.
Setting " " = Off
A medium setting is generally the most
suitable.

Internal Parts

Storage shelves
The shelves can be removed for
cleaning.
To permit storage of food packages of
various sizes, the shelves can be
placed at different heights.
To remove the internal shelf pull
forward until it can be tipped up or
down and removed.
Please do the same in reverse to
insert the shelf at a different height.
The
vegetable drawers and the bottle
shelf should always remain in position, to
ensure correct air circulation.
following effects
glass shelf
GB
are of
above the
59