Cleaning; How To Change The Bulb - BORETTI BRVA88 Notice D'emploi

GB
temporarily happens
constantly. During this the automatic
defrosting is ineffective.
Remaining small ice and frost stains on
back plate of the fresh food compartment
after defrosting period is not abnormal.
The frozen food compartment can not be
equipped with automatic defrosting set
since the deep-frozen and frozen foods
do not endure melting temperature.
Provided it is not too thick, the layer of
frost or ice can be scraped off and
removed using a plastic scraper.
When ice coating is so thick that it can
not be removed with the plastic scraper,
the frozen food compartment has to be
defrosted (generally 2-3 times a year).
Take the foods out of the frozen and fresh
food compartment, wrap them into some
layers of paper or cloth. Put them to a
possible cool place while defrosting.
Break the circuit of the appliance and
leave the doors of frozen and fresh food
compartment open.
Continuously blot off the defrosting water
by a soft cloth or sponge.
After defrosting wipe the surfaces, apply
voltage to the appliance and put the
foods back to their places.
It is recommended to operate the
appliance at the highest position of the
thermostatic control so that it can reach
the proper storing temperature as soon
as possible.

Cleaning

Never use metal objects for
cleaning your appliance as it
may get damaged.
NEVER use detergents, abrasive
powders, highly perfumed cleaning
products or wax polishes to clean the
interior as these will damage the
surface and leave a strong odour.
62
to operate Clean the inside with warm water and
bicarbonate of soda. Rinse and dry
thoroughly.
To guarantee a safe operation of the
fridge, once a year remove the ventilation
grill at the base and clean the air
channels with a vacuum cleaner.
When the appliance is not in use
Disconnect the appliance from the
electricity supply.
Empty all foods and clean the appliance,
leaving the doors ajar to prevent
unpleasant smells.

How to change the bulb

Should the light fail to work you can
change it as below:
Break the circuit of the appliance.
Unscrew the plate screw fixing the lamp
cover, then take the lamp cover off in the
direction of arrow and the bulb can be
changed. (Type of the bulb: Mignon 322,
230 V, 15 W, E 14 thread)
After changing bulb replace the lamp
cover, screw the plate screw and apply
voltage to the appliance.
The lack of light does not influence
operation of the refrigerator.