Temperature Control - BORETTI BIG-K Notice D'emploi

Temperature Control

When this refrigerator is first plugged in, the temperature mode is set to [Middle].
en
Freezer Compartment
Push the FREEZER SET. button and the setting
temperature changes as the figure shows.
>>> Sequential Temperature Change <<<
Faster Freezing...
When you want faster freezing, push the
SUPER FREEZER. button.
Just push the button once again when you
want to stop the mode.
Caution
Foods in the refrigerator can be frozen if the ambient temperature of the refrigerator is below 5°c.
Refrigerator Compartment
Push the REFRIGERATOR SET. button and the
setting temperature changes as the figure shows.
>>> Sequential Temperature Change <<<
Faster Cooling or
Refrigeration
When you want faster refrigerating, push the
SUPER REFRIGERATOR.
Just push the button once again when you
want to stop the mode.
6
How To change the lnterior Light Bulb
The lamp shall be replaced only by a service agent or similarly qualified person.
Change of Freezer Lights
Remove the 2 screws Hold the botton of the
retaining the light cover. light cover and pull
forward to remove.
Change of Refrigerator Lights
Refrigerator Top Lights
Remove the screws Hold the bottom of cover
retaining the light cover. and pull forward to remove.
7
en
Change the light bulb.
Follow the reverse order
of disassembing after
changing the light.
Change the light bulbs.
Follow the reverse order of
disassembing when
assembling back.