BORETTI BRVA88 Notice D'emploi page 68

GB
1. Fit the appliance in the niche by
making sure that it stands against the
interior surface of the unit on the side
where the door hinges of the
appliances are fitted. Insert the
appliance until the upper strip butts up
against the unit (1) and make sure that
the lower hinge is in line with the
surface of the unit (2).
2. Open the door and push the appliance
against the side of kitchen furniture
opposite to that of the appliance
hinges. Fasten the appliance with 4
screws (I) provided in the kit included
with the appliance.
68
3. Press in the joint covers between the
appliance and the kitchen furniture.
4. From the plastic cover (E), which is
used to cover the hinge with the pivot
pin, you must take away the part as
indicated in the drawing.
This operation is made easer since
there is, in the internal part of the
cover hinge lid a groove that facilates
the removal of this coomponent.