BORETTI BRVA88 Notice D'emploi page 69

"Remove the part marked with DX, if
the pivot pin is inserted in the right
hinge, SX in opposite case."
Apply covers (C-D) on joint cover lugs
and into hinge holes. Snap hinge
covers (E) into position.
5. Separate parts Ha, Hb, Hc, Hd as
shown in the figure.
6. Place guide (Ha) on the inside part of
the furniture door, up and down as
shown in the figure and mark the
position of external holes. After having
drilled holes, fix the guide with the
screws supplied.
7. Fix cover (Hc) on guide (Ha) until it
clips into place.
8. Open the appliance door and the
furniture door at 90°. Insert the small
square (Hb) into guide (Ha). Put
together the appliance door and the
furniture door and mark the holes as
indicated in the figure.
GB
69