Truma CP plus Mode D'emploi page 36

– not near to warm air ducts, cold air ducts or other sources
of heat.
– warm or cold air from the air outlets must not flow
against the room temperature sensor. particular attention
must be paid to this when adjusting the air throttles on
Aventa air conditioning systems.
– with good circulation and not on the vehicle ceiling.
Truma dealers / Truma partners are trained in correctly instal-
ling the automatic climate control. You can find our dealers /
Truma partners at www.truma.com.
4. °C / °F temperature display
Select the temperature display °C (Celsius) or °F (Fahrenheit).
Presetting: °C (Celsius).
5. Changing the background lighting
Change the background lighting of the Truma CP plus control
panel in 10 levels.
36
hot
hot
6. 12 h / 24 h mode
Display time in 12 h (a. m., p. m.) / 24 h mode.
Presetting: 24 h mode.
7. Change language
Select the desired language (German, English, French, Italian).
Presetting: English
8. Showing the version number
Display version number of heater, air conditioning system,
Truma CP plus control panel or iNetBox.
Example:
H 1.20.01 –> H = Appliance; 1.20.01
hot
= Version number
Appliance
C = Truma CP plus control panel
C = Truma CP plus control panel CI-BUS
A = Air conditioning system
H = Heater
T = Truma iNet Box
hot
hot