Truma CP plus Mode D'emploi page 33

Set room temperature
– Select the heater, air conditioning system or AUTO using
the rotary push button, depending on the appliance that is
connected.
– Tap rotary push button to confirm selection.
– Select required room temperature with rotary push button.
– Tap the rotary push button to confirm the value.
Set hot water level
– Select required hot water level with rotary push button.
– Tap the rotary push button to confirm the value.
Select energy source
– Select required energy source with rotary push button.
– Tap the rotary push button to confirm the value.
The select energy type menu is displayed if a heating
system with electric heating elements is connected.
hot
hot
hot
Select fan level
– Select desired fan level with rotary push button.
– Tap the rotary push button to confirm the value.
The Select fan level menu is only available if the heater /
hot water level has been set. Not available with automat-
ic climate control AUTO.
Activate time switch (ON)
– Activate time switch with rotary push button (ON).
– Tap the rotary push button to confirm the value.
hot
– The time switch remains active until it is deactivated
(OFF), even for several days.
– If the time switch is programmed and active, the time
switch icon flashes.
hot
2
33