Warning; Fault - Truma CP plus Mode D'emploi

Warning

This symbol indicates that an operating parameter has reached
an undefined state. In this case the appliance concerned
continues to operate. As soon as the operating parameter
is within the target range again, this symbol goes off again
automatically.
Read out code of warning
– Select icon with rotary push button.
– Tap the rotary push button.
The current warning code will be displayed. The cause of
the warning can be determined and remedied with the aid
of the troubleshooting guide (from page 40 and ff).
W = Warning
hot
42 = Fault code
H = Appliance
Cause eliminated / return to the setting level
– Tap the rotary push button.
Cause not eliminated / return to the setting level
– Press the Back button.
In this case, the warning in the Truma CP plus control
panel has not been acknowledged and the warning
symbol remains. The affected appliance remains in warning
status. Other connected appliances can be operated.
38
hot
H = Heater
A = Air conditioning system

Fault

In the event of a fault, the Truma CP plus control panel im-
mediately jumps to the "Fault" menu level and displays the
fault code of the fault. The cause of the fault can be determined
and remedied with the aid of the troubleshooting guide (from
page 40 and ff).
E
hot
112 = Error code
H
Cause eliminated / return to the setting level
– Tap the rotary push button. If the display is in Standby
mode, the background lighting is activated by tapping and
the fault must be acknowledged by tapping again.
– The respective appliance is restarted.
This can take several minutes because of internal after-
runs of connected appliances.
If the cause has not been remedied, the fault will occur again
and the control panel will jump to the "Fault" menu level
again.
If the fault code flashes in the control panel display, this
cannot be reset until up to 15 minutes have elapsed.
Cause not eliminated / return to the setting level
– Press the Back button.
In this case, the fault in the Truma CP plus control panel
has not been acknowledged and the warning symbol re-
mains. The appliance remains in fault state. Other connected
appliances can be operated.
= Error
= Appliance
H = Heater
A = Air conditioning system