Special Displays; 230 V Mains Voltage Available; Truma App With Inet Box; Infrared (Ir) Remote Control (Air Conditioning System) - Truma CP plus Mode D'emploi

9. Presetting (RESET)
The reset function resets the Truma CP plus control panel
back to the factory setting. This deletes all settings. Newly
connected appliances are recognised and saved in the
Truma CP plus control panel.
– Switch on the power supply
12 V direct voltage for CP plus control panel and Combi and
230 V mains voltage for air conditioning systems and Combi E.
Perform Reset
– Select "RESET" with the rotary push button (8).
– Tap on the rotary push button (8).
– "PR SET" appears in the display.
– Tap the rotary push button (8) to confirm.
After confirmation, the Truma CP plus control panel initialises
itself.
"INIT .." appears on the display while this is in progress.
hot

Special displays

230 V mains voltage available

The symbol indicates that 230 V mains voltage (power) is
available at the connected heater and/or air conditioning
system.
hot

Truma App with iNet Box

When a command is sent via the Truma APP of a mobile ter-
minal device, "APP" appears in the display.
Infrared (IR) remote control (air conditioning
system)
When a command is sent via the infrared remote control of
the air conditioning system, "IR" appears in the display.

External control panel (CI-BUS)

When a command is sent via an external control panel with
CI-BUS, "CI" appears in the display.
The Truma CP plus control panel CI-BUS is the company's
own variant that is configured only at the factory.
37