Table des Matières
Publicité
LOWR
ASSEMBLY AND ADJUSTMENT
Forward gear shim
1. Put bearing inner race on the shimming
plate and then put outer race on it.
Shimming plate:
90890-06701
2. Using the digital caliper, measure the
Mv1 (measurement value of the bearing
outer race height).
Digital caliper:
90890-06704
NOTE:
Make measurement after turning outer race
several times.
3. Use the following equation to calculate
the forward gear shim thickness (T1).
Shim thickness (T1) =
16.6 – Mv1 + F/100 (unit: mm)
Available shim thicknesses:
0.05, 0.08, 0.12, 0.30, and 0.50
mm
NOTE:
If the F value is negative (–), then subtract
the F value from the measurement.
6-20
E
Publicité
Table des Matières
