Time; Why Do The Segments On The Circumference Increase And Decrease When I Am In The Time Mode; What Is The Longest Time I Can Set In The Timer; Altimeter - Suunto X-LANDER Mode D'emploi

6.2 TIME

6.2.1 Why do the segments on the circumference increase and
decrease when I am in the Time mode?
The main function of the segments is related to the Compass mode, where a division into 36 segments is
necessary due to the 360-degree scale of a compass. In the Time mode, the segments show the advancement
of seconds. Because the number of seconds differs from the number of degrees, it is impossible for the segments
to be consecutively lit up; they now light up or extinguish, thereby marking the passing of every second.

6.2.2 What is the longest time I can set in the timer?

The maximum range of the countdown timer is 23 hours 59 minutes and 59 seconds.

6.3 ALTIMETER

6.3.1 How do you clear the logbook?

The logbook is self-erasing and cannot be cleared by the user.

6.3.2 How does the logbook self-erase?

The logbook is circular and will start erasing itself when all the memory places are filled. There are approx.
3,800 memory places, each of which contain the altitude as well as the ascent/descent rate at that time (according
to the chosen interval, 20 seconds, 1 minute, 10 or 60 minutes).
When all the memory places are filled, the logbook starts recording new logs on top of the oldest recordings.
This is what is meant when we say the logbook is "self-erasing".
You can clear the history of the logbook; i.e. where you get the cumulative ascent and descent information
based on the logs recorded into the logbook.

6.3.3 How many logbooks can you record?

The number of logs you can record into the logbook depends on the chosen interval and the length of each log.
For example, if your interval is 1 minute, you can get a total of 3,800 minutes of logs into the logbook. This
equals 2.64 days if the recording is continuous (24 hours = 1,440 minutes; 3,800/1,440=2.64).
38